Robert,

Look into "Packet Ham Radio" K4ABT has a good beginners page. I'm not sure if packet radio is still a thing? I haven't used it since the mid to late 90's

Thanks,

Bob KA1TTG




On Wed, Apr 7, 2021 at 5:51 PM Robert Withers via chirp_users <chirp_users@intrepid.danplanet.com> wrote:
An additional query. How is DSP done, then? I thought that is what I was
looking to do, with a program running on connected computers, doing the
processing of the digital data.

Thanks,
Robert

On 4/7/21 5:42 PM, Robert Withers wrote:
> What? Is there no way to transmit data over RF? I thought that that was
> a transmit mode, in eligible frequencies. I guess the info transmitted
> must go through the mic input and out the spk jack, as those are the
> only jacks in my handheld. But I really thought that data transmission
> was possible. Oh dear, much more to research.
>
> Kindly,
> Robert
>
> On 4/7/21 4:57 PM, Nigel A. Gunn G8IFF/W8IFF wrote:
>> You're not going to do that using any connector normally provided on the radio.
>> You can send the data out of the computer through a serial port but it will need to go directly into the modulator or VFO on the radio. There are special data radios available but most amateur transceivers won't do it.
>> Video is different because of the bandwidth required so you might be better with receiver and transmitter designed for TV use.
>>
>>
>>> I want to read /write data to be broadcast over the RF frequency the
>>> radio is set to. I want to intercept the traffic on the computer to run
>>> my own protocol, which may be audio/video but encoded into my protocol.
>>> I am thinking the answer is reading and writing to the tty may work, or
>>> mic input and spk output for audio. But I want data transmission, not
>>> audio.My software currently reads/writes to/from a socket. The read side
>>> of reading from a tty should probably be buffered, somehow. Something to
>>> figure out as I complete my ReedSolomon implementation and fix a few
>>> bugs in my protocol software.
>>>
>>> Kindly,
>>> Robert
>>>

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Bob at bobank03@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com