On Mon, Jan 15, 2024 at 4:55 PM Roland Welte roland.welte@bluewin.ch wrote:
Dear Chirp Community,
I am using Chirp Next with a BAOFENG 5RX radio. Since this particular radio is not among the supported devices I select radio BAOFENG UV-5R, which generally works fine. However, the 5RX radio covers airband frequencies (108-136 MHz) which the UV-5R does not, so Chirp won’t let me enter airband frequencies (although downloading these frequencies from the radio works fine). Is there a trick to circumvent Chirp’s validity checks when entering frequencies?
Your help with this is very much appreciated,
Roland
The UV-5R support is limited to the bands that the radio supports. But there is currently development going on for this model and a test driver module available for testing and feedback. Searching the CHIRP Activity page with '5rx' will currently bring up the active issue (#11046) at the top of the list. I have provided a direct link to the ticket below.
https://chirp.danplanet.com/issues/11046
The current vendor/device selections are currently Baofeng / UV-5RX but I have plans to change that to '5RX' with the next test build or submission.
Please test the driver module and provide feedback.
Jim KC9HI