Glenn. I tried to load this file with chirp. It returned the error msg "Column number mismatch on line xx", where xx went 17 to 169. I continued and Chirp then displays lines 1-16, line 0 is not shown and 1-14 look ok. Lines 15 & 16 Blank entries, no freg or name the rest of the columns are filled in default.
I believe The length is important to chirp... John
On Wed, Jan 16, 2019 at 9:43 AM Nigel A. Gunn G8IFF/W8IFF nigel@ngunn.net wrote:
Why are you playing with CSV files rather than using the Chirp editor?
On 15 January 2019 at 23:38 Glenn At Home GlennErvin@cableone.net wrote:
Hi All, Maybe someone can figure out what I did wrong in my CSV file. It was working, and I added a 10 meter repeater and two 6 meter repeaters and a 1.25 meter repeater. It says error on line 169, but it always seems to reference the last line. The lines in question would be between the left most numbers of 127 and 140. The repeaters on repeater.com only gave one tone, and I put in the others, the 6 & 10 m, just to keep the fields full. The one that was given was the 1.25 m repeater, I'll list that one below:
224.7600
-1.6 MHz
146.2
Omaha Thanks for any help.
Sent From My Tabletop
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John at ke4egc@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com