Wow, I just went to the Miklor website to check it out and the wealth of information on there is incredible! I should have visited that website a long time ago.
On Thu, Mar 2, 2023, 9:13 PM Benton benton@siletzbay.com wrote:
On 3/2/23 17:09, Anthony (N2KI) wrote:
I plugged a Baofeng programming cable into a laptop running Windows 11 but Win11 does not have the drivers to support it. Anyone have a programming cable that works on both Windows 10 and 11?
Regards,
Anthony (N2KI)
Someone will probably reply with a more complete answer but the short form is that the current drivers can detect counterfeit prolific part (and FTDI, for that matter) and refuse to work with them. Your cable is almost certainly built with a counterfeit chip.
What you need to do is point your web-browser at miklor.com and dig down to the instructions for downloading and installing the Prolific v3.2.0.0 driver, which predates the counterfeit detection, and use that. Also lock it in place so that Windows doesn't replace it again with the newer rev.
Benton 2mar23
NX7O benton@siletzbay.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jeff at jeffrey.gallaway@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com