Sometime the cable needs an older driver to perform._______________________________________________בתאריך יום ג׳, 30 במאי 2023, 21:16, מאת Stephen Hersey <n1xnxham@gmail.com>:_______________________________________________This bit might not be obvious; if your operating system recognizes the cable as a serial COM port device, that's all you need on the OS side. After that, it's a matter of telling CHIRP what radio and what COM port to use.Steve--"Any sufficiently advanced technology is indistinguishable from magic." -- Clarke's Third Law"Any technology distinguishable from magic is insufficiently advanced." -- Benford's Corollary"Any sufficiently advanced magic is indistinguishable from technology." -- Charles Stross, Dead Lies Dreaming
“It's still magic even if you know how it's done.” -- Terry Pratchett
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to amnon at amnon.zohar@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Deb at cuddhyd@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com