Make sure you are getting the radio into the clone tx mode. don't forget to hit the set button so the radio blanks out then allows you to press v/m to start the radio to listen for Chirp.
On Sat, May 24, 2014 at 12:47 PM, Lee Alexander leealexander@cox.netwrote:
This may sound funny, but make sure the cable is completely seated into the radio. Sometimes they go in a little stiff, and with a new radio it may feel like it’s properly inserted but it needs to be pushed in further.
*From:* John Cooley wb8wbn@arrl.net *Sent:* Friday, May 23, 2014 10:03 PM *To:* chirp_users chirp_users@intrepid.danplanet.com
Anybody get this cable to work with the radio ? I have installed the drivers on XP SP3. Comes up as COM5. CHIRP says the radio is not connected.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users