Dennis M. Wage (W9BOQ)
245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net
On Wed, Jul 4, 2018 at 9:06 AM, neil b ne.b@hotmail.co.uk wrote:
typical uk repeater
first column
freq - 145.625 name - gb3nw tone mode - tone tone - 67 next few are empty duplex is - (minus) offset - 0.6 mode -fm power - high
----- Original Message ----- *From:* survivor@cryptolab.net *To:* chirp_users@intrepid.danplanet.com *Sent:* Wednesday, July 04, 2018 2:48 PM *Subject:* [chirp_users] How to empty or null tone channel in Chirp?
When I use Chirp to set radio channels, there are many columns I cannot let empty, unless I cannot save it or uploat to radio. Most repeaters here have no subtone and I cannot let tone column empty, or null or zero. In chirp, there is a preseted tone list from 67.0 to 254.1. When I power on the transceiver in frequency mode and ajust to repeater channel, I can hear people talking normally. When I power on in channel mode and choose the respective channel with the same frequency, I cannot hear people talking. Pearhaps, tone values are wrong and in most cases they are unnecessary. How to I solve this? I have a Baofeng UV-82 WITH 8 Watts (HP). Firmware 3 KEY: N822413 6 KEY: 140902N
TKS
PU4YOU
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to m1cfk at ne.b@hotmail.co.uk To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dennis Wage at dwage@dwage.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
