Hi

I suspect you have done this, but just in case. First enter the frequency of your repeater. Then set the return frequency in the  offset column. You can usually enter this as 145.625 or whatever. Later the programme will show as an offset figure, not the frequency that you entered. You need to tell the program that this is either a '-' or '+' offset. You will need to set the relevant CTCSS  tones etc.  for that repeater, whatever they are. If you have done all this then I have no idea what the problem is.


Bernie
2E0NCI




On Saturday, 4 February 2017, 21:10, George Cossey K5GOC <george.k5goc@gmail.com> wrote:


The emergency response community has changed to narrow band.  Some are digital.

On 2/4/2017 2:37 PM, Bill Gabbard wrote:
Donie,
Had same happen here on my UV5R & finally found out that they either changed frequencies or went digital (P25, NAM, Etc. Tones).  If they went Digital but stayed on same freq. all I'd hear was garbled audio................Bill
----- Original Message -----
Sent: Saturday, February 04, 2017 2:41 PM
Subject: [chirp_users] Baofeng Radio Help

I have used CHIRP to program Baofeng UV5R with my local First Responder frequencies. However, I still cannot pick them up. Does anyone have any advice on what I am doing wrong or suggestions for me to try?

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to BillG226 at wcgabbard1@windstream.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com


_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to George at george.k5goc@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com


_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Bernard Dowley at bernard.dowley@sky.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com