I use EditCP on some of my radios (TYT radios) it is written by Dale Farnsworth, you can go to his page.

He makes mention to Chirp in his documentation. It is very good much tighter than most of the CPS you

get with your radios. Here is the web page:

https://www.farnsworth.org/dale/codeplug/editcp/

Someone some day I hope will wake up and build a radio or a programming interface that looks at things

the way we do in hamdom. I.e. you select a channel pair, it has the frequency CC and if both slots are in

use. Then you map talk groups to that channel pair rather than the present method which for commercial

usage makes sense. For us hams we should not have to over and over add the same repeater data for

each and every talk group. But until that day I guess we are saddled with that weirdness.

Best Regards...

On Wed, Jul 3, 2019 at 3:20 PM Tom Henderson <Tom@henderson4.us> wrote:

Yes, the config for DMR is so fundamentally different from most of the radios CHIRP supports that it would pretty much have to be completely different software.
Tom Henderson
On 7/3/19 12:54 PM, Michael MacLeod wrote:
Oh dear, I guess the sums it up as to why I had issues finding any.

Thanks

.\\

On July 3, 2019 at 1:43:51 PM, Nigel A. Gunn G8IFF/W8IFF (nigel@ngunn.net) wrote:

There are NO DMR radios supported by Chirp.

On 03 July 2019 at 12:40 Michael MacLeod <theplayer@playersrealm.net> wrote:

Want to purchase a DMR radio that is supported by CHIRP. All my machines run OS X, so

most OEM programming apps will not work.

So I’m basically looking for CHIRP supported DMR handheld suggestions.

Thanks!

.\\

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032
Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Tom KM4UQB at tom@henderson4.us
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Chuck Hast at kp4djt@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com