there is a yotube video for the solution https://www.youtube.com/watch?v=cf1VVN_0m3s
בתאריך יום ג׳, 13 בנוב׳ 2018 ב-1:00 מאת Jim Unroe <rock.unroe@gmail.com >:
On Mon, Nov 12, 2018 at 5:02 PM Amnon Zohar amnon.zohar@gmail.com wrote:
Anybody has an idea how to release? Maybe contact spray? Are the contactor accesible by opening the unit?
The contacts are inside the socket. You can change the socket. You can try the things mentioned in miklor FAQ 8.1 at the page below.
You could put solder on the socket leads as shown in the attached photo that was provided by Baofeng to someone else that had this issue (the picture was from 2014 or earlier so the board may be different on newer radios. try it at your own risk).
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to amnon at amnon.zohar@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com