Yeah, CHIRP is specifically for analogue programming. Nothing digital, that’s where the manufacturer software comes into play. — With greatest regards, Geordon Shōshin 正心 VanTassle
On Mar 25, 2022, at 10:04 PM, D.J.J. Ring, Jr. n1ea@arrl.net wrote:
That makes it crystal clear.
Glenn, K0LNY and the rest of us now have a clear answer. CHIRP cannot read or write to the digital channels!
Fabulous!
73
David N1EA
On Fri, Mar 25, 2022, 10:47 PM Nigel A. Gunn G8IFF/W8IFF <nigel@ngunn.net mailto:nigel@ngunn.net> wrote: At least for the Yaesu FT-70, I don't have other Yaesu digital radios, Chirp will program frequencies, repeater shift etc. needed for the analogue FM mode but will not let you select digital as a mode or allow the setting of callsigns, etc required tor Fusion/Wires-X use.
On 25/03/2022 22:33 D.J.J. Ring, Jr. <n1ea@arrl.net mailto:n1ea@arrl.net> wrote:
Nigel,
I'm confused - which is probably the way I came out at birth, but isn't the Yaesu Fusion a digital mode?
Can CHIRP work with at least the non-digital channels of transceivers like YAESU FT1DR? That's a Fusion radio but I don't see it listed on https://chirp.danplanet.com/projects/chirp/wiki/Supported_Radios https://chirp.danplanet.com/projects/chirp/wiki/Supported_Radios
Other Yaesu Fusion radios are:
FT1DR FT2DR FT3DR FT5DR FT-70DR FTM-100DR FTM-300DR FTM-400DR FTM-3200DR FTM-3207DR FTM-7250DR FT-991
I see in supported radios, that these are listed:
FTM-3100 (use FTM-3200D selection) FTM-3200D
I don't know if FTM-3200D is different than FTM-3200DR
Could you help unconfuse me, I don't know much about Yaesu digital radios.
Thank you,
73
David N1EA
On Fri, Mar 25, 2022 at 6:12 PM Nigel A. Gunn G8IFF/W8IFF <nigel@ngunn.net mailto:nigel@ngunn.net> wrote:
No. Chirp works fine with Yaesu radios. Never heard of a genuine case of Chirp bricking a radio.
On 25/03/2022 17:46 K0LNY_Glenn glenn@ervin.email wrote:
Is this correct?
----- Original Message -----
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Geordon VanTassle at gvantass@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com