On Sun, Jan 5, 2020 at 11:55 AM Jonas Haiduk jhaiduk@hotmail.com wrote:
My friend gave me a spreadsheet of frequencies programmed into his radio, which included the following
I can hear him through my radio, but I cannot send to him so that he can hear me. Attached is a screenshot of what I attempted in CHIRP. I have a feeling the problem I am experiencing is due to the Channel Spacing column from his spreadsheet, which I'm not sure how to deal with in CHIRP
I have a BAOFENG A-58 and am using CHIRP for Mac.
Thanks in advance for any help!
Jonas
Hi Jonas,
You friend probably made a mistake on the information that he sent you. It is unusual to not program an encodde (TX) CTCSS tone without a matching decode (RX) CTCSS tone on simplex. What I would do is program 2 channels and upload them to your radio...
Channel 1: Tone Mode = Tone | Tone = 131.8 Channel 2: Tone Mode = TSQL | ToneSql = 131.8
Try them both. Keep the one that works.
Jim KC9HI