I just had that happen with a new USB cable. Was pushed in plenty far but it put the UV5R into
transmit. As soon as I told chirp to read the radio, it came out of transmit and read the radio just
fine. Then I made changes and wrote back to the radio with no problem.

I turned the radio off and back on and it went back into transmit. Something strange with that cable..

On 11/17/2016 7:19 PM, Ronny Julian wrote:

I have a couple of 888s UHF radios and the cable I have for them is coming up on COM 3 Problem is the radio goes into transmit when connected to the cable and turned on. The cable has worked on my UV-5R radios before but now also puts them into transmit. The only thing that has changed is i have gone to a laptop (Windows 10) to a desktop machine (Also Windows 10).

Any ideas?

Thanks!

Ronny

K4RJJ
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to johnr@k9ij.net at johnr@k9ij.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

-- 
John Rice  K9IJ
johnr@k9ij.net
Webmaster, Network Admin, Janitor