Thanks again for all the help Jim. I've been around scanners for about 25 years but the UV-5R is pretty different. I'll let you know if it works ok.
-------------------------------------------- On Fri, 12/6/13, Jim Unroe rock.unroe@gmail.com wrote:
Subject: Re: [chirp_users] Programming PL into UV-5R To: "Discussion of CHIRP" chirp_users@intrepid.danplanet.com Date: Friday, December 6, 2013, 11:06 AM
No problem. The first thing that you should do it to click "View" in the menu bar and enable "Hide Unused Fields" if it isn't already.
RX only:
Tone Mode: Cross DTCS Rx Code: 465 DTCS Pol: NN
Cross Mode: ->DTCS
RX and TX (you don't need the TX code to listen but it doesn't hurt to have it set):
Tone Mode: DTCS
DTCS Code: 465 DTCS Pol: NN
You might be interested in looking at the "CHIRP Guide" on the Miklor.com website and the "Understand CHIRP's columns" guide available from the CHIRP wiki pages.
http://www.miklor.com/COM/UV_CHIRP.php http://chirp.danplanet.com/projects/chirp/wiki/MemoryEditorColumns
Jim KC9HI
On Fri, Dec 6, 2013 at 10:46 AM, scott richardson elmrich120966@yahoo.com wrote:
Thanks for the help Jim. I've already done as you instructed but I was wanting to find a way to program the PL because another town's PD is coming through too. I was wondering if there is a way to block unwanted signals.
-----Inline Attachment Follows-----
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users