A simple complete reset will get you back to "square one" minus the pre-programmed channels/memories.
The pre-programmed memory channels were not the same on different versions or even the same versions of the same radio. Most just had FRS and GMR frequencies, which you can upload yourself with the help of Chirp.

Here's how:
Open Chirp and connect radio.

Download the reset radio's image.

Click Radio and then Click US FRS and GMRS Channels
image.png

Click OK
image.png

Click Radio then Upload To Radio
image.png

Click OK
image.png
That's pretty much it.

Dennis M. Wage (W9BOQ)

245 Corum Hill Road


On Mon, Oct 14, 2019 at 8:15 AM Charlie Koonce <charliko@live.com> wrote:
I find myself in a similarsituation!  Any help or file that can get me back to square one, will surely be appreciated.

-Charlie N5AYP

The world is changed by your example, not your opinion.

PAUL COEHLO









On Oct 14, 2019, at 06:51, Jim Unroe <rock.unroe@gmail.com> wrote:

On Mon, Oct 14, 2019 at 7:00 AM Steve <kc7byp@gmail.com> wrote:

Hi chirp_users.  I have a Baofeng UV-5RA HT.  I am trying to reset up the HT the way it was after #40 (factory reset) in the HT's menu was hit. I remember most of the layout of the HT's memory when I looked at it via Chirp, but I never saved it. The layout as I remember starts at memory ch 1. From ch 1 to about ch 30 was filled with ham repeater frequencys and simples ch's. all on the (A, top display).  Then there was about 20 blank ch's.  The 21st ch had FRS1 on the 21st memory ch and so on. I don;t know how to setup the 21st memory ch to on the (B) lower display FRS1 and to rx/tx to the other FRS ht's that I have.



Steve,  kc7byp@gmail.com
From the desk of the radio station KC7BYP
10/14/2019

Hi Steve,

Your radio has 128 memories (channels) numbered from 0 to 127. Both
the top (A) display line and bottom (B) display line have equal access
to all 128 memories. There are no banks and therefore no way to
separate them into A only or B only banks.

Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Charlie at charliko@live.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Dennis Wage at dwage@dwage.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com