Everything there is windows specific.
The 'radio does not respond' message comes after the radio reboots.
It looks like the drivers loads fine:
[ 139.540792] usb 1-1: new full-speed USB device number 2 using xhci_hcd [ 139.553007] usb 1-1: New USB device found, idVendor=067b, idProduct=2303 [ 139.553013] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 139.553017] usb 1-1: Product: USB-Serial Controller [ 139.553019] usb 1-1: Manufacturer: Prolific Technology Inc. [ 139.560429] usbcore: registered new interface driver usbserial [ 139.560444] usbcore: registered new interface driver usbserial_generic [ 139.560453] usbserial: USB Serial support registered for generic [ 139.561154] usbcore: registered new interface driver pl2303 [ 139.561166] usbserial: USB Serial support registered for pl2303 [ 139.561185] pl2303 1-1:1.0: pl2303 converter detected [ 139.561925] usb 1-1: pl2303 converter now attached to ttyUSB0
On 05/14/2016 08:37 PM, John LaMartina wrote:
Eugene, This may assist. Compare the error messages you are seeing against those at http://www.miklor.com/COM/UV_ErrorMess.php If it indicates a driver issue, refer to http://www.miklor.com/COM/UV_Drivers.php
Let us know the result. John http://www.miklor.com
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Eugene Sent: Saturday, May 14, 2016 6:02 PM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] Boafeng UV-5RV2+ unable to download
I ordered a programming cable for my Baofeng UV-5RV2+ and the first time I tried to download from the radio I got 25 channels. Trying again only channel 5 and 6 would show up. I upgraded the the latest version of CHIRP and now when I try the radio just reboots and CHIRP says an error has occured, radio does not respond. Did I get a bad cable?
Thanks _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John LaMartina at johnla@usa.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
No virus found in this message. Checked by AVG - www.avg.com Version: 2016.0.7597 / Virus Database: 4568/12229 - Release Date: 05/14/16
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Eugene at enine@ninefamily.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com