there is a yotube video for the solutionבתאריך יום ג׳, 13 בנוב׳ 2018 ב-1:00 מאת Jim Unroe <rock.unroe@gmail.com>:On Mon, Nov 12, 2018 at 5:02 PM Amnon Zohar <amnon.zohar@gmail.com> wrote:
>
> Anybody has an idea how to release? Maybe contact spray?
> Are the contactor accesible by opening the unit?
>
The contacts are inside the socket. You can change the socket. You can
try the things mentioned in miklor FAQ 8.1 at the page below.
You could put solder on the socket leads as shown in the attached
photo that was provided by Baofeng to someone else that had this issue
(the picture was from 2014 or earlier so the board may be different on
newer radios. try it at your own risk).
Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to amnon at amnon.zohar@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com--Amnon