From: "Brent Wells" <n4bdw73@gmail.com>
To: "Discussion of CHIRP" <chirp_users@intrepid.danplanet.com>
Sent: Saturday, 24 September, 2016 02:42:25
Subject: Re: [chirp_users] Press the cord into the Radio REALLY HARD !!!!        Re: Baofeng GT-5TP

Dave, I have a cable that does the same thing when plugging into my 5R and F8HP, so I took my knife and slightly shave just to the inside of the 'angle' so that it snapped into the radio better because I worried I would bend or snap the pins if I pushed too hard each time. Just a tip!

Brent (N4BDW)

Sent from my iPhone

On Sep 23, 2016, at 8:20 PM, Dave Felt <feltdd@verizon.net> wrote:

Only thing I've learned is to Press the programming Cable into the radio REALLY HARD !!!!!

73's,, Dave KB6ORR

On 9/23/2016 1:21 PM, Todd Bloomingdale wrote:

Hello All,

I've read on a few amazon reviews that the Baofeng GT-5TP can be programmed using chirp using the UV-82HP setting. I can not get the radio to work

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Brent at n4bdw73@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to awake@0324am.net at awake@0324am.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com