Jim
Thank you. Your last solution with clicking on properties allowed me to enter the frequencies and tones. But now all the channels can only be accessed in the B (lower) bank of channels. When I press the EXIT/AB button it will not lock on the A (upper) bank. So it looks like I somehow disabled the dual watch function. Could this have been something I did in Chirp? Thanks again.
Glenn
In a message dated 3/4/2015 6:15:37 P.M. Eastern Standard Time, rock.unroe@gmail.com writes:
On Wed, Mar 4, 2015 at 4:57 PM, Northeastcourier@aol.com wrote:
Hello,
Chirp opens and downloads from a Beofeng UV 82L, but when I try to enter
any
info in any field (frequency, tone, name, etc ) the previous entry
reverts
back to whatever was originally there. Can anyone help with this problem. There is also a frequency that keeps appearing ( 146.010, I think, when
the
newly programmed one disappears ). Had no problem when I originally programmed this radio last month. Thank you.
Glenn
When you key something into a field or make a selection from a drop-down menu, you need to press enter or click on another cell to make it "stick". A quick way to make sure that a new entry or setting selection has been made fully is to click the [Refresh] button. If it doesn't stay, you didn't press enter or click onto another cell to complete the change.
Another way, and it may be simpler for some is to click on the memory row that you want to edit, the choose "Properties" from the drop-down menu that appears. Then change the settings as required and click the [OK] button to accept the changes.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com