Hap,
Turn radio OFF, then press the "3" key & hold, turn radio on while holding the "3" down,you should see a BFBXXX where XXX is a number like BFB397.

 

73s,

Bill

----- Original Message -----
From: Hap Hatch
To: 'Discussion of CHIRP'
Sent: Friday, March 22, 2013 2:02 PM
Subject: Re: [chirp_users] baufeng uv-5r

3.0

 

From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jim Unroe
Sent: Friday, March 22, 2013 9:19 AM
To: Discussion of CHIRP
Subject: Re: [chirp_users] baufeng uv-5r

 

What version of CHIRP are you using? Can you attach an image downloaded from your radio?

Jim On Fri, Mar 22, 2013 at 12:11 PM, Hap Hatch <HapHatch@verizon.net> wrote:

I have had a problem with a new uv-5r.  I have programmed two other uv-5r radios in the past with no problems at all but this new one gives me a warning as follows---“Upload finished, but the 'Other Settings' could not be sent because the firmware version of the image does not match that of the radio”

Can you help?  Thanks.  Hap Hatch  k6hap


_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users

 

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users