This is for all DSTAR icoms. Did you get it to save the urcall information? I can download from the radio but it will not upload back in to memory with the new changes.
That would make sense. The Icom software has it in banks of 100.On Mon, Jan 18, 2016 at 10:27 AM, Drew from Zhrodague <drewzhrodague@zhrodague.net> wrote:On 1/16/16 1:22 PM, David Etheridge wrote:
> I have a new iMac I can get chirp to read my radio but it will not write to it I keep getting an error saying that chirp can’t see the radio but it just cloned it. I have tried two different cables down loaded the drivers and reinstalled chirp.Thanks for any help.
I had to make sure each frequency memory was assigned to one of the
banks before the radio would accept the upload from CHIRP.
I suspect there is a way to force these constraints, but I am not so
familiar with Python yet =_)
Also, it seems you can only have upto 100 memeories per bank. This is
from memory with my banging on it for a few days.
--
Drew from Zhrodague
post-apocalyptic ad-hoc industrialist
drew@zhrodague.net
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com