I was composing a response email to explain that I'd tried it more than 20 times to no avail. Before hitting send I decided to try it again. Finally I got the data to upload to the radio; however, I can't discern anything I did differently on the final attempt.
On Wed, Aug 17, 2011 at 10:41 PM, Dan Smith dsmith@danplanet.com wrote:
I just gave the 8/17 build a try on my 2800M also. I was not able to upload back to the radio. The terminal output was either "Failed to read echo" or "Radio did not ack ID"
Hmm, I assume you put it into receive mode before you hit the OK button on the clone settings dialog box, right?
I recall it being quite a bit more finnicky than most radios... Can you guys try it a couple times, rebooting the radio into clone mode and putting it back into receive each time before you try? If that works, then I might just need to make the clone start code a little more "gentle".
-- Dan Smith www.danplanet.com KK7DS _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users