Masterwulfe,
You are right, I can still monitor, but only on that frequency the PTT does not function!
Thank you!
Joe (KN4AXA)
Sent from my cellphone (small keyboard--big thumbs)
On Apr 14, 2017, at 00:05, masterwulfe masterwulfe@gmail.com wrote:
Yes .You may need to verifie, But I believe you can go to the the duplex setting for the freq you don't want to TX on buy setting the duplex to the OFF setting an then test it buy pressing the PTT an see if the TX indicator light up.It should not if I am right.
On Thu, Apr 13, 2017 at 8:45 PM, joe douthitt joedouthitt@gmail.com wrote: I am new to the CHIRP community and have been following some of the discussions. I am impressed to see how wiling everyone is share their knowledge. I have been online reading and have not been able to find the answer I need.
My question: is there a way to have a frequency programmed in Chirp so that my Baofeng UV5R will monitor but cannot transmit on that channel?
Blessings,
Joe Douthitt KN4AXA _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Mike Kartchner at masterwulfe@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Joe Douthitt at joedouthitt@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com