Instead of TSQL, just use Tone.
Jardy Dawson WA7JRD Ham Radio
Message sent by... Oh who the heck really cares?
On Apr 22, 2018, at 23:32, Ernst Wittenschläger ernst.wittenschlaeger@gmail.com wrote:
Hi All, I am using CHIRP to program in all of my repeaters into the UV-82HP. I ran into an issue: When loading in the CTCSS Codes to "unlock" the repeater, the software will load the CTCSS code on BOTH the Receive CTCSS (R-CTCS, Menu 11) and Transmit CTCSS (T-CTCS, Menu 13), instead of ONLY the T-CTCS, so I am unable to receive any signal coming back from the repeaters. Afterwards, when I try to change the R-CTCS to 0.000 Hz, it will automatically switch back to the programmed R-CTCS code when I exit the Menu. I have not seen in CHIRP a way to program EITHER the R-CTCS or the T-CTCS, there's only one called:TSQL, which seemingly changes both the R-CTCS & the T-CTCS
Is there a way where I can change my R-CTCS codes back to 0.000 Hz and save the setting permanently in my radio?
Thanks & 73! Ernst WA3FAW _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com