Ok I found the hang-up, the plug into the Radio was not completely seated. Downloaded the Radio Image and saved it to a work file. That done I opened the repeater local listing selecting 220 MHz and populated the Radio image list 1-44, then went to 440 MHz attempting to populate list 45 plus. Didn’t work instead it overwrote the 1-44 list. HELP!!!
Scott
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jim Unroe Sent: Friday, October 27, 2017 4:44 PM To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] CHIRP DOWNLOAD problems
This is what I found using Device Manager
OK. The good news is you don't have a Prolific type chip. It is instead is a WCH CH340 chip. The driver auto-installed by Windows should be fine.
The port assigned to the programming cable is COM3 so that is what you should choose.
Jim
