23 Jan
2015
23 Jan
'15
9:13 p.m.
What's Putty?
Will these fixes work with an Icom IC-T70A?
I am trying to get Chirp to communicate.
Bry
On 23 Jan 2015 at 20:23, Rick Osgood wrote:
Before I proceed I would like to show you what I have under device manager.
From where or what would you delete?
Thanks
On Fri, Jan 23, 2015 at 1:03 PM, mats.g.roos@gmail.com <mats.g.roos@gmail.com > wrote:
- Open Device Manager
- Remove Old Com ports and USB devices: Proceed to step 2 of this tutorial.
- When that is done, still in Device manager, navigate to your problem USB cable (it should have a yellow exclamation mark on it)
- Remove it, and then reinstall the driver
- If that driver will still not work then:
- Right click on it, and choose update driver.
- Click Browse my Computer...
- Click Let me pick from a list...
- A list of all of the drivers should show. Choose the oldest Prolific driver on the list. I chose version 3.2.0 from 2007
- Install it, and you're done!
If you are using PuTTy, note that when you connect, the COM port may not work as expected. What you should do, if you need to, is go into the Serial options in the main PuTTy window, and turn off flow control. Everything should work right now. Mats
On Jan 23, 2015, at 12:53 PM, Rick Osgood <rposgood@gmail.com> wrote: I have tried multiple ports. can someone email me the right driver? I have windows set to look for an .inf file to update an unknown device. Thanks On Fri, Jan 23, 2015 at 9:36 AM, Larry <lhlauer@earthlink.net> wrote: Try plugging the cable into a different USB port. WB2UFO Larry On January 23, 2015 9:15:05 AM CST, Rick Osgood <rposgood@gmail.com> wrote: I have the cable branded Baofeng. I uninstalled the new version and installed v3.2.0.0. Following directions, I unplugged the usb cable, ran the install then plugged the cable back in. Windows did not even see that a new device has been introduced. I had to shave off a little of the connector that plugs into the radio or it would only go in half way. I am sure it is seated fully now.... Help! On Fri, Jan 23, 2015 at 8:59 AM, Jim Unroe <rock.unroe@gmail.com> wrote: On Fri, Jan 23, 2015 at 8:18 AM, Rick Osgood <rposgood@gmail.com> wrote: > Is this model supported by Chirp or can I select a different model? Windows > 7 finally saw the usb connection and it is now listed as an unknown device? > > Thanks for the great work! > > -- > Rick Osgood >From the Supported Radios list on the CHIRP home page... Baofeng/Pofung BF-F8HP (in daily builds) If you have a programming cable with a Prolific type chip, be sure to downgrade your installed driver to v3.2.0.0. http://www.miklor.com/COM/UV_Drivers.php Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users -- Rick Osgood 411 Walnut Street #9722 Green Cove Springs, FL 34023 chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users -- Rick Osgood 411 Walnut Street #9722 Green Cove Springs, FL 34023 _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users-- Rick Osgood 411 Walnut Street #9722 Green Cove Springs, FL 34023