Is the port speed between the radio and the program set correctly? If the radio is set at 4800 and the program is communicating at 9600 or whatever, it is not going to work.

Duffy
www.wb8nut.com

On Jul 26, 2015, at 6:58 AM, Jeremy Dieringer <jdieringer1028@sbcglobal.net> wrote:

I am on my 2nd day of trying to program this TYT TH-9800 plus.
I installed the correct USB driver.

Tried in CHIRP repeatedly with various ports and keep getting "Communication" error. (Failed to communicate with the radio: Unable to communicate with the radio)

My radio is currently Port 14 - however this does not show up in the list in CHIRP. Even When I manually put it on port 3,4,5, no success.
Same with TYT software, it seems like it ONLY wants port 3, however when I place on port 3, no success.

Very frustrating.

By the way - this link doesn't work (404 error) http://chirp.danplanet.com/download/beta/



I'd appreciate any help - Thank you
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com