I used the speaker jack to 9 pin D connector to serial to USB (FTDI ) and turned on the radio and on Chirp > Radio and selected Icom and auto detect and it downloaded the memory data.The IC2200H screen displayed CL OUT then back to normal display after download and all the memories and DSTAR data was there as far as I could tell.Maybe what was described in the trouble query is for rig to rig clone? I hope this helps,73 de rolan w3fdk
Trying to use CHIRP 0.4.1 to program an Icom IC-2200H. All I can get is an error message- "Failed to communicate with the radio: Unexpected response from radio."I don't think it's a driver problem. FTDI cable is recognized by the computer as COM5. A similar cable on COM4 works fine with a UV5B.Should the radio be on any special settings? I tried the Clone mode; that didn't seem to make any difference.Could there be an issue with the speaker port? (Probably outside the scope of this list.)I'm new to this; am I missing something?thx,MarkKG7NZQ--Mark Crummett
Portland, OR
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users