Your problem is most likely a counterfeit Prolific chip in the cable. Go to www.miklor.com and they tell you how to install a legacy driver for the chip which will recognize the radio with your computer attached. You can also go into your operating system and tell it not to automatically update that particular driver when new versions of the operating system are installed. Chris Knowles, N1CAK
On 4/20/2019 6:26 AM, KBD99603 via chirp_users wrote:
Hello everyone, I have a Baofeng BF-UVB3 8W radio. My computer is linux, running Ubuntu 18.10, the newest. I have CHIRP installed and running, but I am not able to find the COM port for my radio, connected via a USB programming cable.
I have entered every terminal command line I could find info about on the internet, even one that showed me port numbers for connected devices, yet there is no port number or path that works for my radio.
What COM port should I use?
Thank You KBD99603
Sent with ProtonMail Secure Email.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Christopher Knowles at cknowles@tiac.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com