Success. The software prevented me from using the UV-5R selection. But, the BF-F8 selection worked for the BF-F9 (both are 3-power radios). Thanks
From: John LaMartina Sent: Thursday, December 17, 2015 7:31 PM To: 'Discussion of CHIRP' Subject: Re: [chirp_users] Is BF-F9V2+ Supported
John is correct. Select UV5R. If the firmware is not compatible, the program will stop you providing you are using the Latest Daily Build. http://www.miklor.com/COM/UV_CHIRP.php
Sent: Thursday, December 17, 2015 6:39 PM To: Discussion of CHIRP Subject: Re: [chirp_users] Is BF-F9V2+ Supported
I’ve been admonished once for selecting a different model than listed on the radio... don’t want to do the wrong thing.
From: swphillips@cox.net
Sent: Thursday, December 17, 2015 5:46 PM
To: chirp_users@intrepid.danplanet.com
Subject: [chirp_users] Is BF-F9V2+ Supported
Just received my new BF-F9V2+. Don’t see that model in the CHIRP dropdown menu for reading from the radio. Is it supported? Thanks. Steve P
--------------------------------------------------------------------------------
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
-------------------------------------------------------------------------------- _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com