Hi Pavel,
Many thanks, and I should have said, I am using windows 10,and if you want to release to me, I will check.
Regards
Adrian
From: chirp_users-bounces@intrepid.danplanet.com mailto:chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Pavel Milanes (CO7WT) Sent: 11 July 2016 17:29 To: chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] QYT8900 or Mini-8900
Hi Adrian,
The mini-8900 is troublesome with Chirp, it and all of it's variants (JT6188Plus, JT2705M, etc) it can be put into work in windows but it always fails on linux. It has a slightly different communication schema that the others in the family.
We are working on a solution in an internal dev version, we have managed to have it some way stable on windows but still failing on linux.
Chirp's developer here..
73 Pavel CO7WT
El 11/07/16 a las 12:10, Adrian Mundy escribió:
Hi all.
New to this group, but would appreciate some assistance please.
I have used the latest software and can read, and probably write to a QTY 8900, but I am having problems with the Mini-8900 in that it sometimes it will not see the com port, and more often, will not enter into the clone mode of the radio. The cable is a purpose made commercial cable, and with the 2 radios side by side, I have made all the settings the same from what I can see.
The settings are Waccom and mini-8900
Am I missing something
Kind regards
Adrian Mundy
2E0LWR
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to M.Sc. Pavel Milanes Costa at pavelmc@gmail.com mailto:pavelmc@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com