On Friday, January 6th, 2023 at 09:55, K0LNY_Glenn <glenn@ervin.email> wrote:
Another approach is to bevel the four edges with a
pocket knife, affectively making the insertion piece a bit smaller, because
it
may not be the flat surface that is the problem, but the outer diameter of the
plug
That is what I wound up doing (I used a Dremel and a rattail file) and it solved the problem nicely.
The Doctor [412/724/301/703/415/510]
The old world is dying, and the new world struggles to be born. Now is the time of monsters.