There were even some Fake FTDI chips about a few years ago.
In Windows, use the Device Manager to view the list of connected devices. Look under printer & serial devices, if a Serial device is marked with a yellow warning triangle with a ! in the middle, there is a problem between the driver and the device itself.
I've come across some fake IC's that were marked up as FTDI, but identified themselves to the OS as Prolific! So, obvious fakes. (Though on a Linux box, they did work OK as Prolific devices.) That was for a work project too, we got our refund though.
(I've given up with Windows for my own personal and Ham useage, no regrets...)
I wanted FTDI specifically, as you can program the behaviour of the status lines, and also the "sense" of the data lines. I needed the TX data line inverted from normal (to accommodate an Fibre Optic sender, but the RX line left as default, as the FO RX device doesn't invert the data, in that configuration, with the pre-existing TTL - Fibre interface boards I had to use.)
The Fake FTDI chips allowed me to do that without error, but did't actually make the changes, or "stick" the settings in their internal memory.
If I need any USB-Serial bridge products, I now only buy from FTDI direct, or from reputable sources (but of course, the cost is higher than the "other" sources.)
You get what you pay for.
73. Nic.
Dave G0WBX(G8KBV)
On 11/07/2022 20:47, Nic Heath wrote:
Dave
That is possible. Windows and linux identified my chip as made by FTDI. I wasn't sure how to check on mac. I was/am using a CT-1 from ttl2usb dot com. Hard to tell if ttl2usb dot com sourced a bad chip or not. I have had this serial device for quite a few years. But the last time I used it I was using windows 7.
-Nic
On Mon, Jul 11, 2022 at 2:35 PM Dave B via chirp_users chirp_users@intrepid.danplanet.com wrote:
On 11/07/2022 20:00, chirp_users-request@intrepid.danplanet.com wrote: > I don't really understand why windows with the latest version would not > work or mac OS with the latest version would not work. But this old version > on linux did. What data lead were you using? If it uses a Prolific USB-Serial bridge, it may be an old type of chip, or a clone. Either way Windows (and many Mac systems) will not use them. (Without compromising the security of your system by blocking automatic updates and then manually installing an earlier driver suite.) But Linux (even recent distro's) use them just fine, regardless. Had similar issues locally, with a group that uses dozens of Baofeng radios. All the interface leads used "hookey" chipsets. A Windows box and a Mac, both failed. My old Dell running Mint, "just worked"... Counterfeit IC's are rife in that part of the gadget after market. Take care. Dave G0WBX(G8KBV) -- Created on and sent from a Unix like PC running and using free and open source software: _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nic at nicheath@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com