Hi Jim and all,
A doubt about the mac-usb-serial.com.
I wrote them a couple of times with a question on the availability of the legacy version without receiving a reply. As you know, is the site still on or is there someone on the list from their group?
My point is: if I proceed with the payment, should I be able to access in automatic also the older High Sierra driver or should they send it manually? On the site it is not clear and since they don’t reply…
Thanks,
Giulio
Il giorno 10 nov 2020, alle ore 20:59, Giulio Marchi emfdb@tiscali.it ha scritto:
Il giorno 10 nov 2020, alle ore 02:44, Jim Unroe rock.unroe@gmail.com ha scritto:
The above ( /dev/cu.usbserial ) indicates that you have a programming cable with a Prolific type USB-to-Serial chip. Genuine Prolific chips are very rare in programming cable so the likelihood of your chip being an unauthorized copy is very high. In that case you need to purchase and use a 3rd party device driver. This is the one I bought and installed on my macBook Air to use with my large variety of programming cables with a "Prolific" chip.
https://www.mac-usb-serial.com/
Jim KC9HI
Ah, interesting. I was taking for granted that driver-wise I was fine since I could download from the radio and I already installed the following ones as suggested in other discussions I read:
- PL2303_MacOSX_v1.6.4_20200911.zip from http://www.prolific.com.tw/US/supportDownload.aspx?FileType=56&FileID=13... (I also tried PL2303HXD_G_Driver_v2_0_0_20191204.zip from http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=229&pcid=41 with similar results)
- RTSystemsMacDriversV24.zip from http://www.rtsystems.us/drivers/
In case it may shed more light, the attachment shows the response of the “Serial Detect” app from mac-usb-serial.com.
I will give a try to their driver and report back. Apparently with the Sunday sale.
Thanks again,
Giulio IU0BMW
<Yaesu VX-6 cable.jpg> _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Giulio at emfdb@tiscali.it To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com