Is it in Clone mode?
On Mon, Jun 28, 2021 at 2:17 PM Joel Magee jmagee385@gmail.com wrote:
The cable and disc came with the radio. And maybe on your screen it says to upload but I only have two options highlighted Import to Radio or Download from radio. I will continue to play with it and I appreciate all your suggestions but have tried them all. Being a retired engineer I am not about to let a man made object get the best of me. Thanks Joel
On Mon, Jun 28, 2021 at 8:26 AM Jim Unroe rock.unroe@gmail.com wrote:
On Mon, Jun 28, 2021 at 6:37 AM Joel Magee jmagee385@gmail.com wrote:
I have on several occasions tried to program my Baofeng uv5r, and every
time I get to the point where I Import info to radio Chirp informs me it is not working
Any suggestions??? Joel KO4QFK
You don't "import" to a radio. You upload to it. CHIRP will provide a specific error message. CHIRP also puts information about the error in the debug.log file that it creates.
You should provide this exact error message and/or debug.log file. Without this information, it is hard to give specific advice.
The most common error message is cause of problems is "Radio did not respond". The 2 main causes of this are...
- An incompatible device driver for the programming cable is
installed. This mostly happens when using Windows (you didn't say what you are using) and the programming cable was manufactured with a Prolific type USB-to-Serial chip. The driver installed by Windows is incompatible. A workaround for this is to download, install and select the older Prolific v3.2.0.0 driver.
https://www.miklor.com/COM/UV_Drivers.php#install
- The 2-pin plug of the programming cable and the socket of the radio
are fully engaged. This can be due to variations in manufacturing of the socket in the radio and/or the length of the pins on the programming cable. Sometimes putting pressure on the plug during the cloning process can help with getting the required connection. Other times there is an interference between the plasting shell of the plug and the case of the radio that prevents the plug from being fully inserted. Sometimes a modification of the plug's shell is needed to make a proper connection.
https://www.miklor.com/COM/UV_ErrorMess.php#error1
Many times both of these conditions exist at the same time. Both have to be addressed before CHIRP can communicate with the radio.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to joel at jmagee385@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to BOB JETER at 904jeter@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com