Ignore that column. It isn't used unless you have it selected as a squelch type on one of the columns before it.
From: Lynch Scott-RTTV40 rttv40@freescale.com To: "chirp_users@intrepid.danplanet.com" chirp_users@intrepid.danplanet.com Sent: Sun, February 24, 2013 5:23:48 PM Subject: [chirp_users] ICOM IC-2100H
I did a read from my Icom IC-2100 using Chirp. All the memories that were in the radio were loaded into chirp successfully, but there was one additional column called ToneSql that was set for all channels to 88.5. I do not use a Receive tone squelch on any of the channels, so not sure why this column is showing up after the read from the radio. Also, there does not seem to be a way to set the ToneSql to not be active. The drop down menu for each channel does not have a “n/a” or “none” option, just more tone frequencies.
How do I make the tone squelch inactive for the receive so I can add some frequencies to the current list and then write back to the radio? Can I just “hide” the ToneSql column and then when I do the write the ToneSql will not be written to the radio?
Scott Lynch Freescale Semiconductor MSG R&D 480-413-2723