It may be too late for that? I just installed the "stable" version, and it worked. So this is an issue with the daily build version I was using, or so it would seem.
Basil
On Thu, Jan 23, 2014 at 5:34 PM, IZ3GME Marco iz3gme.marco@gmail.comwrote:
Hi Basil I think there can be some useful info in the log, can you please reproduce the problem and send it? Here is how to collect debug log
http://chirp.danplanet.com/projects/chirp/wiki/How_To_Report_Issues#Getting-...
tnx 73 de IZ3GME Marco
On Thu, 23 Jan 2014 16:31:20 -0600 Basil Copeland blcjr2@gmail.com wrote:
Thanks for the prompt reply. At least with respect to the FT-60,
Commander
was not open; at that point, it had not even been installed. IAC, I just went through the whole process again with the FT-60. Same error.
Seems curious to me that this would happen with two different cables connected to two different radios. I really do not see how it could be a cable issue. Driver issue, perhaps. That would be the only common denominator. The driver is FTDI 2.8.30.0, dated 7/12/13, and installed using COM4, as COM1/3 is reported "in use" (that would be for a Prolific driver/USB cable used with the UV-5R).
Basil KE5GAE
On Thu, Jan 23, 2014 at 3:58 PM, Tom Hayward esarfl@gmail.com wrote:
On Thu, Jan 23, 2014 at 1:27 PM, Basil Copeland blcjr2@gmail.com
wrote:
windows, with a final error message saying something about being
unable
to
"read echo" and then "bad cable?"
This error means that Chirp tried to send something out over the serial port and didn't get a response. With Yaesu cables, everything sent should echo back to the serial port, because the tx and rx lines are connected together. The cause of this is usually, as reported, a faulty cable or driver. My only other idea is that another program may have been using the serial port when Chirp tried to access it. Was Commander still open?
Tom KD7LXL _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users