My initial thoughts on this, although I am by no means an expert, is that FLRIG is a rig control application, whereas CHIRP is a programming tool, unless used in 'live mode'.
G7TXU_______________________________________________On Tue, 26 Jul 2022 at 21:03, Michael Nadler KI7QIB <michael.nadler@gmail.com> wrote:_______________________________________________ICOM 7100 connected to Linux system via the mini-USB port. FLRIG can control the radio through that interface.Running CHIRP 0.3.0dev, when I try to download from the radio via /dev/ttyUSB0, I get a pop-up error message: unicode strings are not supported, please encode to bytes: <<gibberish characters>>>".Are there specific settings I need to have set on the ICOM?Is CHIRP able to interact with the ICOM-7100 via the mini-USB port? Do I have to use the RT-Systems FTDI cable into the audio port?P.S. I also tried running Windows CHIRP daily-20220408. Download from radio gets "error" in every entry.--Michael NadlerKI7QIB
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Tony Ling at tonyg7txu@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Michael Nadler at michael.nadler@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com