I DOWNLOADED THE ORIGINAL FACTURY SETTINGS AND THEN REWROTE THE FREQUENCIES I NEEDED AND RELOADED THE MODIFIED FACTORY AND IT WORKED FLAWLESSLY. Thanks for all your help. Hap K6HAP
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Bill Gabbard Sent: Friday, March 22, 2013 11:26 AM To: Discussion of CHIRP Subject: Re: [chirp_users] baufeng uv-5r
Hap,
Turn radio OFF, then press the "3" key & hold, turn radio on while holding the "3" down,you should see a BFBXXX where XXX is a number like BFB397.
73s,
Bill
----- Original Message -----
From: Hap Hatch mailto:HapHatch@verizon.net
To: 'Discussion of CHIRP' mailto:chirp_users@intrepid.danplanet.com
Sent: Friday, March 22, 2013 2:02 PM
Subject: Re: [chirp_users] baufeng uv-5r
3.0
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jim Unroe Sent: Friday, March 22, 2013 9:19 AM To: Discussion of CHIRP Subject: Re: [chirp_users] baufeng uv-5r
What version of CHIRP are you using? Can you attach an image downloaded from your radio?
Jim On Fri, Mar 22, 2013 at 12:11 PM, Hap Hatch HapHatch@verizon.net wrote:
I have had a problem with a new uv-5r. I have programmed two other uv-5r radios in the past with no problems at all but this new one gives me a warning as follows---"Upload finished, but the 'Other Settings' could not be sent because the firmware version of the image does not match that of the radio"
Can you help? Thanks. Hap Hatch k6hap
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
_____
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users