FWIW - I downloaded CHIRP last Sunday afternoon. Connected to a T70. Chirp did not recognize the radio model. Once I clicked T70 is was smoothe sailing. Using a serial cable and an USB / Com port converter. nu5d
On Wed, Apr 10, 2013 at 1:02 PM, Dane Ronnow dane@daneronnow.com wrote:
Having trouble with CHIRP and an Icom T70A HT. When I try to download from the radio, I get an error "Failed to communicate with the radio: unexpected response from the radio."
The software works fine with a Baofeng UV-5R, firmware v297.
Here's what I'm using:
Quality FTDI cables for both radios (from Valley Enterprises).
Version 2.08.28 driver for 32-bit Windows XP (from ftdichip.com).
CHIRP v0.3.1.
I installed the driver and software. In Device Manager, the COM port is 4 with the Icom cable; 3 with the Baofeng cable.
With the Baofeng, I plugged the cable into the radio, then into the computer, turned on the radio, then launched the software. When I download from radio, I set the port to COM3, the select the radio and model. Progress bar opens and LED on the radio blinks green as the data is downloaded.
I can make changes, upload, etc. All is good with the UV-5R.
Basically same process with the Icom T70:
I plug the cable into the radio first, then into the computer. I verify COM port in Device Manager, which is 4 with the Icom cable. I power on the radio, then launch the software. I select receive from radio, then select COM4 from the popup menu, Icom, T70.
The progress bar pops up momentarily, then the error message, "Failed to communicate with the radio: unexpected response from the radio."
Any ideas?
I'm thinking of trying an earlier release of CHIRP, though I would hate to see the Icom able to connect, but not the Baofeng. Out of the two radios, the Baofeng is the one that needs the software programming capability the most.
Any input would be greatly appreciated. Thanks much.
Dane
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users