I turned the radio on while holding the "MHz/PRI" button. Then turned the dial to F-7 CLONE
Should I do something else?
-Mark
On Mar 11, 2013, at 6:35 PM, chirp.cordless@xoxy.net wrote:
Did you put the radio in clone Tx mode after telling chirp to read the radio?
Sounds like you've got the driver installed ok.
-dan
On Mar 11, 2013, at 3:27 PM, Apple //GS - apple2gs@sbcglobal.net wrote:
Okay.
First thank you all so very much trying to help me CHIRP now has " /dev/cu.usbserial-RTWA39NN " in the pull down menu. I picked both the 7800 and the 8900 to test to see if one of them would work.
This is what it said to be on both tries: Failed to communicate with radio: Failed to read header (0)
…….. :(
-Mark
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users