Dan, I think I did not come across correctly. The memory settings are working fine, it is the rest of the columns that are not being imported, etc... For example, here are the headers and one memory. If this helps explain what I am talking about.
Tag,RX Freq,Name,Mode,Skip,Step,Masked,RPT Sh,ShiftFrq,TS/DCS,Tone,DCS,TX Pwr,TX Dev,Clk Sh, BANK 1, BANK 2, BANK 3, BANK 4, BANK 5, BANK 6, BANK 7,BANK 8,BANK 9,BANK10,BANK11,BANK12,BANK13,BANK14,BANK15,BANK16,BANK17,BANK18,BANK19,BANK 20,BANK21,BANK22,BANK23,BANK24
146400,146.4000,ALPHA,NFM,OFF,5 KHz,NO,SIMP,0,OFF,100.0,23,HIGH,NORM,OFF,X,,,X,X,,,,,,,,,,,,,,,,,,,1
-- John
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users- bounces@intrepid.danplanet.com] On Behalf Of Dan Smith Sent: Sunday, April 01, 2012 4:29 PM To: Discussion of CHIRP Subject: Re: [chirp_users] Yaesu VX6R
Ummm, "image with some known bank information"? If I use another software package I can see bank info columns. If I try to download the radio image using chirp then it stops at the skip column. The other columns past that are not showing up at all.
What I need you (or someone with a vx6) to do is, on your radio, program
some memories into
banks and then download an image. Create an issue on the website, attach
your image and tell me
what memories are in which banks (i.e. memory 1 in bank 1 and 2, memory 2
in bank 3, etc.)
-- Dan Smith www.danplanet.com KK7DS