My radio is Baofenf UV-5R. I am learning to use chirp. That why I'm puzzled. I used CHIRP to program my radio and I did tell it to display frequency on A, and name on B. I got unexpected results in that B seems to be locked on 70CM CA the call frequency.
On Tue, Nov 17, 2020, 12:25 PM Jim Unroe rock.unroe@gmail.com wrote:
Hi Harold,
On Tue, Nov 17, 2020 at 12:41 PM Harold Gray hlgray14@gmail.com wrote:
When I set B to display the channel name it displays 70CM CA which is
the name of frequency 446.000 in stead of the name of all the frequencies that I am using on A. How can I fix this?
It would help to know which radio model you are talking about. But I am going to take a guess and assume it is a Baofeng UV-5R or UV-82 like radio.
At the radio you can menu 21 (MDF-A) and menu 22 (MDF-B) to choose the Memory Display Format (MDF). The choices are CH, NAME and FREQ.
Review the guide that matches your radio model the closest. https://www.miklor.com/COM/UV_MenuDef.php
Using CHIRP you would use the following settings...
Settings -> Basic Settings -> Display Mode (A): Channel | Name | Frequency Settings -> Basic Settings -> Display Mode (B): Channel | Name | Frequency
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Harold Gray at hlgray14@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com