Jackson, I'm glad you've managed to get CHIRP to work for your radio. However, I'm not sure how holding the OK button for a second resolves anything for uploading to the radio. It's not programmed that way. The download from radio instructions still include holding the PTT for 1 second.
John, would you be able to tell us what the error message says? What operating system are you using and what version of CHIRP?
Chris, KG7QCP
On Tue, May 2, 2017 at 7:00 PM, Jackson Pemberton < jacksonpemberton@gmail.com> wrote:
Don’t let the nomenclature mess with your brain. The CHIRP software together with the programming cable makes your radio think you are cloning another radio (the source radio) to the one you want to program (the target radio). The clone instructions in the User Manual are correct (for the target radio) whether you are actually cloning one radio to another or uploading from CHIRP to your handheld.
Yes, I understand that you can copy from the radio to CHIRP just fine. There is some confusion going on here. I am talking about moving the programming you have done on your computer in the CHIRP software to your handheld FT-60R. When you do that you chose “Upload to Radio” in the “Radio” menu of the CHIRP software. You will see a dialog box with choices to make regarding the Port, Vendor and radio Model. When you make those selections and click OK, you get another dialog box titled “Yaesu FT-60 Instructions”. (You will notice that these instructions are the same as those in the User Manual for the target radio, except for the full-second thing). When you have followed the instructions on your CHIRP screen you need to click on the OK button and keep it down a full second because that is mimicking the PTT switch on a source radio. Otherwise you are not following the clone instructions in the manual.
BTW, I complained to CHIRP about the defective dialog that doesn’t say to hold down the OK button a full second and they immediately fixed that but I see that today, it is gone again.
Hope this helps.
Jackson Pemberton W7VMK
On May 2, 2017, at 11:45 AM, John Perry wx5jp@jpunix.net wrote:
On 5/2/2017 11:10 AM, Jackson Pemberton wrote:
Exactly. It is the last step before transfer of data should begin. I
had the same problem then happened to notice in the FT-60R manual that when cloning you need to hold down the PTT switch on the sending radio for a full second. I tried that with CHIRP upload and it finally worked! I complained to the CHIRP people that the instruction dialog in the software did not say “a full second” and they fixed it in later versions. Your version should be telling you to hold it for at least a full second.
Hope this helps.
Jackson Pemberton, W7VMK
Actually it's the wrong direction. I can send from the FT-60 to CHIRP with no problems. It's sending the modified data back to the FT-60 that's giving me the issues.
-- John Perry - WX5JP
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jackson Pemberton at jacksonpemberton@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@
intrepid.danplanet.com
Best regards, Jackson Pemberton
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chris Fosnight at chris.fosnight@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com