Hi Glenn; if you can use notepad Try looking at your csv file with it. I see a difference in the record format starting at line 15. I'm not sure but I believe csv records are to be the same length. Also starting after 135 there are blank entrys.

Looks like line # 136 to 137 are missing, also 139 and 140. I don't know if this your problem or not. However I could not load your file using Chirp, it caused an error .... Good luck...John M...

On Tue, Jan 15, 2019 at 11:38 PM Glenn At Home <GlennErvin@cableone.net> wrote:

Hi All,

Maybe someone can figure out what I did wrong in my CSV file.

It was working, and I added a 10 meter repeater and two 6 meter repeaters and a 1.25 meter repeater.

It says error on line 169, but it always seems to reference the last line.

The lines in question would be between the left most numbers of 127 and 140.

The repeaters on repeater.com only gave one tone, and I put in the others, the 6 & 10 m, just to keep the fields full.

The one that was given was the 1.25 m repeater, I'll list that one below:

224.7600

-1.6 MHz

146.2

Omaha

Thanks for any help.

Sent From My Tabletop
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to John at ke4egc@arrl.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com