Download the manual for the radio. it should have a pinout of the data connection. My FT-8900 is wired the same as your rig, I don't think they have changed the pin numbers since they started using the mini DIN plug for data. I used spare Wouxon cable and put a mini DIN plug on it to use to program my 8900.

On Sat, Oct 18, 2014 at 4:54 PM, <ARSK0MBB@aol.com> wrote:

Hello All,

I have a Yaesu FT-7800 radio which I program manually. I also have a Baofeng UV-5RE plus with programming cable. I run Windows 7. I have successfully programmed the Baofeng and would like to know if anyone has used CHIRP and the UV-5RE programming cable to program the Yaesu FT-7800. The FT-7800 uses a PS2 type connector at the rear of the radio so I would have to make a custom cable interface which is no problem, I'm just puzzled over the connections / pinout. Thanks & 73

Jerry S. R.Ph. KØMBB

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users