You have to switch it to English by selecting English on the radio buttons. Then the question marks will disappear eh?

 

I hope I understand your issues, if not good luck!

 

Bill

----- Original Message -----

From: Mike va3mw

To: Discussion of CHIRP

Cc: Discussion of CHIRP

Sent: Saturday, December 28, 2013 3:52 PM

Subject: Re: [chirp_users] Baofeng V6

Jack and I are seeing the same thing. We don't have the right software for the right radio. 

I know 100% in my case that the computer, ports and cable are functional. 

Boafeng own software has language localization issues.  The software loads but all the icons are full of question marks. .???

The failure is that the program tries to talk to the radio and the radio does not respond, so it times out. 

Sorry for the bandwidth on the chirp reflector, but this was the best collection of these type of users I know. 

Sadly there is no BF-v6 listed on their download site. 

Mike va3mw

On Dec 28, 2013, at 5:25 PM, Amnon Zohar <amnon.zohar@gmail.com> wrote:

are you sure widows did. not automaticaly upgrade the driver to the newer not compatible version?

בתאריך 28 בדצמ 2013 21:34, "w4grj" <w4grj@satterfield.org> כתב:

I am using the Baofeng software, error message cannot connect to radio

It is not a cable or port issue.

Jack

W4GRJ

 

From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of John LaMartina
Sent: Saturday, December 28, 2013 2:29 PM
To: 'Discussion of CHIRP'
Subject: Re: [chirp_users] Baofeng V6

 

Is the programming of the UV-6 software or a driver/cable issue.

What error messages are you getting?

 

John K3NXU . . . http://www.miklor.com

 

 

From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of w4grj
Sent: Saturday, December 28, 2013 2:15 PM
To: 'Discussion of CHIRP'
Subject: Re: [chirp_users] Baofeng V6

 

I have a UV-6, also cannot get it to program with the Baofeng software.

Has anyone successfully programmed the UV-6?

Thanks,

Jack

 

 

From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Michael Walker
Sent: Friday, December 27, 2013 10:14 PM
To: Discussion of CHIRP
Subject: Re: [chirp_users] Baofeng V6

 

Yes, it isn't a port issue.  

 

Mike

 

On Fri, Dec 27, 2013 at 10:11 PM, Amnon Zohar <amnon.zohar@gmail.com> wrote:

could you comunicate with any other radio?

בתאריך 28 בדצמ 2013 05:07, "Michael Walker" <va3mw@portcredit.net> כתב:

Hi All

 

I know that this is a little off topic and this radio isn't supported by Chirp, but has anyone actually been able to program one?

 

This is a 16 Channel VHF only unit.

 

I've tried just about all the software from Baofeng that I can find, but I have not found anything that will talk to the radio.

 

I am 'assuming' it is using a Kenwood cable configuration as well.

 

Mike va3mw

 

 

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users

 

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users

---

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users