according to Icom the cable and software are different from a 207 to a 208. so im now looking for another cable 


thanks for the information 




On Sep 2, 2020, at 2:13 PM, Bill A via chirp_users <chirp_users@intrepid.danplanet.com> wrote:

thanks its a old radio so not sure , was hoping the software was the same as the 208h.   thanks 


On Sep 2, 2020, at 1:53 PM, Neil - ee <ne.b@hotmail.co.uk> wrote:

that radio not supported yet....
----- Original Message -----
From: bob burks
Sent: Wednesday, September 2, 2020 6:19 PM
Subject: Re: [chirp_users] programming a icom ic207h

I have problems with different radio and usually it's a connect with.radio side. Make use the radio is turned on also. I have done this numerous times.

On Wed, Sep 2, 2020, 1:01 PM Bill A via chirp_users <chirp_users@intrepid.danplanet.com> wrote:
hi all
I have a ic207h and a rt systems cable usb 29a cable.
but when I try to commute with the radio I get a error message cannot read from radio ?
any suggestions 

thanks Bill kc4jqh 
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Bob at kc4lb1@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com


_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to m1cfk at ne.b@hotmail.co.uk
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Bill Anderson at kc4jqh@yahoo.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Bill Anderson at kc4jqh@yahoo.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com