There is no way in the world that these radios are legal on MURS, GMRS, FRS, or CB. the homepage for this users group clearly states that. Please do not encourage people to operate illegally on this forum.

Thank you.

Jardy Dawson

WA7JRD Ham Radio

Message relayed through SETI (Search for Extra-Terrestrial Intelligence, although no terrestrial intelligence has been found yet, either)

On Apr 24, 2016, at 06:24, Robert Taylor <vawing@gmail.com> wrote:

Dan murs ,gmrs,, and FRS, have pretty much became cb channels of the FM world.
I really don't think anyone is checking the power output levels on these we use them all the time for hunting mostly murs.
Pretty good idea ,no interference no one cares.

On Apr 24, 2016 7:32 AM, "Dan Jolley via chirp_users" <chirp_users@intrepid.danplanet.com> wrote:

I have a UV-82C and I can only select either 1Watt or 5Watt output using CHIRP or the factory programming software.

Is there some way using CHIRP (or other means) to select 2Watts for MURS or 500mW for FRS frequencies 8 through 14?

I'm pretty sure the answer will be "no" because I know the power output selection is embedded in the firmware in the radio.

Is there an antenna that will reduce the power output without damaging the radio?

Thank you for any information on this subject,
Dan

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Robert Taylor at vawing@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Jardy at jardy72@yahoo.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com