That's exactly what happened. It's working for me perfectly on Windows 7 using the RT cable for my Yaesu VX-8R.
On Fri, Sep 28, 2012 at 4:13 PM, Robert Terzi rct@r-t.org wrote:
Ahh that's very interesting. If I'm following what you did on some version of windows, what you did was to replace the driver that was associated with the RT VID/PID with the current FTDI driver, which let you then tell it to provide a Virtual COM Port (VCP) in addition to the FTDI Direct I/O interface.
(In other words you associated the FTDI drivers with the RT VID/PID without having to edit the .inf file.)
On 9/28/2012 6:54 PM, Cory (NQ1E) wrote:
Here's what worked:
- Download the VCP driver zip file and expand it to a folder -
http://www.ftdichip.com/FTDrivers.htm
- Open up the device manager and update the driver for the RT cable
device
- Go though the "let me choose" and "have disk" options to point it at
the folder where the files were unzipped.
- Install the driver that shows up even if it warns about it not being
compatible.
- The device now shows up as "USB Serial Converter", go to its
properties/advanced tab and check the box called "Load VCP".
- Unplug the device and plug it back in
- A new com port device will show up, but a driver will not load for it
automatically.
- Go thought the same process as before to install the driver from that
unzipped folder.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users